| G code |
Description |
| G00 |
Rapid traverse |
| G01 |
Linear movement |
| G02 |
Circle/helix in clockwise direction |
| G03 |
Circle/helix in the counterclockwise direction |
| G04 |
Dwell time in [s] or spindle revolutions |
| G05 |
High-speed cycle cutting |
| G05.1 |
High-speed cycle -> Call CYCLE305 |
| G08 |
Pre-control ON/OFFG15 Polar coordinates off |
| G09 |
Exact stop |
| G10 |
Write work offset/tool offset |
| G10.6 |
Retraction from contour (POLF) |
| G11 |
End parameter entry |
| G16 |
Polar coordinates on |
| G17 |
XY plane |
| G18 |
ZX plane |
| G19 |
YZ plane |
| G20 |
Inch input system |
| G21 |
Metric input system |
| G27 |
Checking the reference position |
| G28 |
1. Approaching a reference point |
| G30 |
2./3./4. Approaching a reference point |
| G30.1 |
Reference point position |
| G31 |
Measuring with “delete distance-to-go” |
| G40 |
Deselection of cutter radius compensation |
| G41 |
Compensation left of contour |
| G42 |
Compensation to right of contour |
| G43 |
Positive tool length compensation on |
| G44 |
Negative tool length compensation on |
| G49 |
Tool length compensation off |
| G50 |
Scaling off |
| G51 |
Scaling on |
| G50.1 |
Mirroring on programmed axis OFF |
| G51.1 |
Mirroring on programmed axis ON |
| G52 |
programmable work offset |
| G53 |
Approach position in machine coordinate system |
| G54 P0 |
external work offset |
| G54 |
Selecting work offset |
| G55 |
Selecting work offset |
| G56 |
Selecting work offset |
| G57 |
Selecting work offset |
| G58 |
Selecting work offset |
| G59 |
Selecting work offset |
| G60 |
directed positioning |
| G61 |
Exact stop modal |
| G63 |
Tapping mode |
| G64 |
Continuous-path modeG66 Macro module call |
| G65 |
Macro call |
| G67 |
Delete macro module call |
| G68 |
Rotation ON, 2D/3D |
| G69 |
Rotation OFF |
| G72.1 |
Contour repetition with rotation |
| G72.2 |
Linear contour repetition |
| G73 |
High-speed deep hole drilling cycle with chip breakage |
| G74 |
Left tapping cycle |
| G76 |
Fine drill cycle |
| G80 |
Cycle off |
| G81 |
Drilling cycle counterboring |
| G82 |
Countersink drilling cycle |
| G83 |
Deep hole drilling cycle with chip removal |
| G84 |
Right tapping cycle |
| G85 |
Boring cycle, retraction with G01 after reaching the end in axis Z, without spindle stop |
| G86 |
Boring cycle, spindle stops and then retraction with G00 after reaching the end in axis Z |
| G87 |
Reverse countersinking |
| G89 |
Boring cycle, stay for a while and then retraction with G01, without spindle rotation direction change |
| G90 |
Absolute programming |
| G91 |
Incremental programming |
| G92 |
Setting actual value |
| G92.1 |
Delete actual value, reset the WKS |
| G93 |
inverse-time feedrate (1/min) |
| G94 |
Feedrate in [mm/min, inch/min] |
| G95 |
Revolutional feedrate in [mm/rev, inch/rev] |
| G96 |
constant cutting rate on |
| G97 |
constant cutting rate off |
| G98 |
Return to starting point in fixed cycles |
| G99 |
Return to point R in fixed cycles |
| G290 |
Selection of Siemens mode |
| G291 |
Selection of ISO dialect mode |
Machine Tools
Alco d.o.o -Aleksandrovac - Srbija